Fault finder: Light-tracking turret
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Turns away from the light: what should I check?
Flip the signs for that axis.
Jitters: what should I check?
Raise DEAD and check the supply capacitor.
Nano resets: what should I check?
Power the servos separately.
Hits end stops: what should I check?
Adjust the constrain limits.
