Fault finder: RGB mood lamp with three knobs

11 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

One colour never lights: what should I check?

Check that leg and its resistor.

Colours are inverted: what should I check?

You have a common-anode LED, wire the long leg to 5V and use 255 minus each value.

Light looks harsh: what should I check?

Diffuse it in a jar or lower the maximum value.

Colours flicker: what should I check?

Loose pot wiring, press the jumper wires in firmly.

Button toggles twice: what should I check?

Hold the delay(30) debounce, or check for a loose wire.