Fault finder: RFID wristband cashless payment
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Reader not found: what should I check?
Check the 3.3 V supply and the SPI wires.
Tag unreadable: what should I check?
Set it up in top-up mode first.
Keys ignored: what should I check?
Check the row and column order.
