Projects / Wireless doorbell / Fault finder

Fault finder: Wireless doorbell

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No chime: what should I check?

Check pin numbers on both boards and that both use the RadioHead library.

Random chimes: what should I check?

Noise from the receiver, check the counter and message length checks.

Short range: what should I check?

Add antennas and keep the radios away from metal.

Upload fails: what should I check?

Disconnect the radio DATA wire while uploading.

Chime plays twice: what should I check?

The counter check is missing on the receiver.