Fault finder: Restaurant bill splitter

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Keys come out in the wrong order: what should I check?

Swap the row and column pin lists.

Nothing appears: what should I check?

Check the OLED wires and try address 0x3D.

Decimal point twice: what should I check?

The sketch allows only one in a field.

Share looks wrong: what should I check?

Check you pressed A after each field.

Library not found: what should I check?

Install Keypad by Mark Stanley.