Fault finder: Resistor tolerance explorer

5 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Reads about 1023: what should I check?

Unknown resistor missing (open).

Reads 0: what should I check?

A0 shorted to GND.

Arduino far from meter: what should I check?

Check RREF and that 5V is really about 5 V.