Fault finder: Read a schematic and build it
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Always silent: what should I check?
Check the 555 pins and the buzzer wiring; check pin 4 voltage in light.
Always sounding: what should I check?
Check pin 4 is connected to the divider, not to + directly.
Weak tone: what should I check?
Check the transistor orientation and the passive buzzer type.
Unstable: what should I check?
Add a 100 nF capacitor across the battery.
