Fault finder: Rain barrel level lights
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LEDs flicker: what should I check?
Increase SETTLE_MS to ride out waves.
A level never shows: what should I check?
Check the float orientation, many have an up side marked.
Wrong LED lights: what should I check?
Check which float is on which pin.
All blink together: what should I check?
A lower float is not closing, check its wiring.
Corroded joints: what should I check?
Use sealed connectors and keep the Nano indoors.
