Fault finder: Quiz buzzer system
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Two LEDs light: what should I check?
Impossible with this code, check a wiring short instead.
A team never registers: what should I check?
Its button wire is loose or on the wrong pin.
Buzzer silent: what should I check?
An active buzzer needs digitalWrite instead of tone().
Random wins: what should I check?
A button has no ground return or is floating. Check the common ground.
