Fault finder: Quiz buzzer box
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No lights: what should I check?
Check LED direction and the 220 ohm resistors.
A button does nothing: what should I check?
Check its wire reaches GND and the correct pin.
Resets by itself: what should I check?
Check the reset wire is not touching a player wire.
No beep: what should I check?
Use a passive buzzer on D10.
Two lights come on: what should I check?
Reset and check there is a locked flag in the sketch.
