Projects / Quick-draw duel / Fault finder

Fault finder: Quick-draw duel

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Never starts: what should I check?

Hold both buttons for a full second.

Red lamp never lights: what should I check?

Check D5 and the LED direction.

False starts every round: what should I check?

Release both buttons fully during the countdown.

No buzzer: what should I check?

Use a passive buzzer on D8.

Same delay every time: what should I check?

Check the random seed line is present.