Fault finder: Arduino as ISP programmer shield
8 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Not in sync: what should I check?
Check the capacitor and the four ISP wires.
Error LED on: what should I check?
Check the chip orientation and power.
Chip will not respond: what should I check?
It may need an external clock; fit the crystal.
