Fault finder: Cooker whistle counter

12 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Counts by itself: what should I check?

Move the microphone away from the fan and the burner noise, or raise the 4 in the threshold.

Never counts: what should I check?

Turn the microphone gain screw up a little, or lower the 4.

Counts one whistle twice: what should I check?

Lengthen the one-second quiet time.

Display blank: what should I check?

Check the I2C wires and address 0x3C.

Beeps at the wrong number: what should I check?

Check the target on the top of the display.