Fault finder: Battery life measurement lab
12 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Reads zero: what should I check?
Check VIN+ and VIN− are in series with the load.
Negative values: what should I check?
Swap VIN+ and VIN−.
Noisy readings: what should I check?
Average more samples.
Estimate far too long: what should I check?
Include the Nano and OLED current, and use a realistic capacity.
