Fault finder: Automatic poultry feeder
8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Gate jams: what should I check?
The servo cannot push through feed. Increase the gate size or use a stronger mechanism.
Nano resets when the servo moves: what should I check?
The servo is on the Nano supply. Use its own supply and a 1000 µF capacitor.
Feeds twice: what should I check?
The minute check failed, so keep the lastFedMinute logic.
Time is wrong: what should I check?
Re-upload to reset the RTC or fit a fresh coin cell.
