Fault finder: Virtual pet keyring
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blank screen: what should I check?
Check SDA and SCL, then try the NONAME screen type.
Upload fails: what should I check?
Check the programmer wiring and the chip selection.
Cell dies in days: what should I check?
Check the screen switches off and no pin floats.
