Fault finder: Battery motion night light
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Never lights: what should I check?
Tune the DARK threshold.
Lights in daylight: what should I check?
Check the LDR divider side.
Flickers: what should I check?
Check the MOSFET is the logic-level IRLZ44N and the supply.
Short battery life: what should I check?
Measure standby for a leaking part.
