Projects / Piezo drum pad / Fault finder

Fault finder: Piezo drum pad

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Triggers by itself: what should I check?

Raise THRESHOLD or move the disc away from vibrating surfaces.

No readings: what should I check?

Check the brass goes to GND and the ceramic to A0.

Only low values: what should I check?

Press the disc harder against the surface or loosen the pad.

Extra notes after one hit: what should I check?

Increase LOCKOUT_MS.

Buzzer silent: what should I check?

Use a passive buzzer, polarity matters on some.