Projects / Pico W Wi-Fi clock / Fault finder

Fault finder: Pico W Wi-Fi clock

7 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Display stays blank: what should I check?

Check the CLK and DIO wires and the 3.3 V power.

Time is wrong by hours: what should I check?

Change UTC_OFFSET to your time zone in seconds.

Time never appears: what should I check?

Check the Wi-Fi name and password, and that the network is 2.4 GHz.

Digits garbled: what should I check?

Check CLK and DIO are not swapped.

Colon does not blink: what should I check?

Some modules wire the colon to the second digit only, check the module.