Fault finder: Pico SD card voltage logger

9 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

OSError mounting the card: what should I check?

Check the wires, and that the card is FAT32 and 32 GB or smaller.

ImportError for sdcard: what should I check?

Save sdcard.py on the Pico.

Empty file: what should I check?

Press the stop button, or wait for the five-line save.

Garbage in the file: what should I check?

Re-format the card and avoid pulling it out while the light is on.

Voltage reads wrong: what should I check?

The input must be between 0 and 3.3 V, and the pot ends need 3.3 V and GND.