Projects / Pico arpeggiator / Fault finder

Fault finder: Pico arpeggiator

9 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Silent: what should I check?

Check the buzzer is passive and on GP15, and that the button was pressed.

Same chord always: what should I check?

Check the middle wire of the chord knob on GP27.

Too loud: what should I check?

Lower the duty number 20000.

Notes jump around: what should I check?

Check the knob wires are firm.

Button toggles twice: what should I check?

Hold the press less than a second or keep the debounce delay.