Fault finder: Pico melody box
7 checks for this build on the Pico. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Pico supply pin
Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No sound: what should I check?
Check the buzzer is passive and wired to GP15.
Notes run together: what should I check?
Increase the gap fraction in play.
Out of tune: what should I check?
Check the frequency numbers in the list.
Long press not recognised: what should I check?
Hold the button for a full second.
Program does not start on power-up: what should I check?
Save it on the Pico as main.py.
