Fault finder: Pico infrared remote code reader
10 checks for this build on the Pico. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Pico supply pin
Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing appears: what should I check?
Check the receiver pin order, many modules are OUT, GND, VCC from the left.
Check failed: what should I check?
Hold the remote steady and closer, and keep bright sunlight and fluorescent lights away from the receiver.
Random numbers: what should I check?
The remote may not use NEC, try another remote.
ImportError for ssd1306: what should I check?
Install the micropython-ssd1306 package.
Display blank: what should I check?
Check the I2C wires and that the address is 0x3C.
