Fault finder: Musical stairs
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Sensor always blocked: what should I check?
Turn its screw to lower the sensitivity.
Note repeats: what should I check?
Check the edge detection and that the beam is steady.
No sound: what should I check?
Check the SD card format (FAT32) and the file names.
Crackling: what should I check?
Use a separate good 5 V supply for the amplifier and player.
