Fault finder: Raspberry Pi 5 terminal weather desk
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No BME280 found: what should I check?
Check the four wires, and that I2C is on after a reboot.
ModuleNotFoundError: what should I check?
Run the program from the virtual environment with its own python.
Temperature too high: what should I check?
Move the sensor away from the Pi 5 on longer leads.
Trend never appears: what should I check?
It needs about ten minutes of readings.
Garbled screen: what should I check?
Use a terminal that understands ANSI codes, such as the Pi's own.
