Fault finder: Pi mini status screen

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Check I2C is on and i2cdetect shows address 3c.

ModuleNotFoundError: what should I check?

Install luma.oled for the same Python you run.

Permission error: what should I check?

Add your user to the i2c group or run with sudo.

Wrong characters: what should I check?

The default font is small, keep text short.

No network shown: what should I check?

Connect Wi-Fi or Ethernet first.