Fault finder: Pi with a battery-backed clock

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing at 68: what should I check?

Check wiring and that I2C is enabled.

Address stays 68 after the overlay: what should I check?

Check the overlay line and the config file path, then reboot.

hwclock error: what should I check?

Remove fake-hwclock and reboot.

Time resets to an old date: what should I check?

Check the coin cell and its polarity.

Wrong time zone: what should I check?

Set it with raspi-config.