Fault finder: Pi 4 clock that keeps time offline

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No device at address 68: what should I check?

Check the module seating and that I2C is switched on.

Shows 68 not UU: what should I check?

The overlay line is missing or has a typo, check config.txt.

Cannot read the module: what should I check?

Run with sudo and check the overlay.

Time resets after power off: what should I check?

Fit or replace the module's cell.

Script error on the date: what should I check?

Use Python 3.11 or newer, as on Bookworm.