Fault finder: Pi clock that survives power cuts

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Date is wrong after a power cut: what should I check?

Charging was not enabled or the battery is flat; charge it for a few hours.

hwclock not found: what should I check?

Use Raspberry Pi OS Bookworm on a Pi 5.

No such file rtc0: what should I check?

The RTC is not enabled; check you are on a Pi 5 with current Raspberry Pi OS.