Projects / Retro games console / Fault finder

Fault finder: Retro games console

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Lightning bolt on screen: what should I check?

Power supply too weak; use the official 15 W one.

Controller not found: what should I check?

Press a button to map it, and try another USB port.

Game stutters: what should I check?

Overheating or a heavy system; check vcgencmd get_throttled.

Button does nothing: what should I check?

Wrong config.txt, or wires on the wrong pins.

Pi does not wake: what should I check?

Only GPIO3 can wake a Pi from halt.