Fault finder: Pi plus Pico co-processor

7 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing arrives: what should I check?

Swap TX and RX and check the shared ground.

Garbled text: what should I check?

Check both use 115200 baud.

Permission denied on serial: what should I check?

Add your user to the dialout group.