Fault finder: Raspberry Pi LED and button with gpiozero
11 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing happens: what should I check?
Check you used BCM numbers (GPIO17 is physical pin 11, GPIO2 is pin 3).
GPIO busy" error: what should I check?
Another script still owns the pin. Stop it, or reboot.
Never connect 5 V to a GPIO pin: what should I check?
The Pi's GPIO is 3.3 V only. 5 V can destroy it.
