Fault finder: Pan-tilt camera tracker
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Moves the wrong way: what should I check?
Swap the sign in that axis.
Swings back and forth: what should I check?
Lower KP.
Pi resets: what should I check?
Power the servos from their own supply.
