Fault finder: USB-powered desk speakers

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the 5 V supply and the input ground.

Crackling: what should I check?

The supply is too weak, use a 2 A adapter and shorter wires.

Hum: what should I check?

A ground loop, use a separate adapter or a battery.

Only one speaker: what should I check?

Check that channel wiring.

Board very hot: what should I check?

Lower the volume and turn off, check for a shorted speaker wire.