Fault finder: Over-the-air firmware updates
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Update fails: what should I check?
Check the server address, firewall and the file name.
Not enough space: what should I check?
Use a partition scheme with two app slots.
Rollback does not work: what should I check?
Check your core version supports app rollback.
Loop of updates: what should I check?
Make sure the version in the code matches version.txt after updating.
