Fault finder: Pocket game on a Nokia screen
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Screen blank: what should I check?
Raise or lower setContrast and check the 3.3 V supply.
Garbled screen: what should I check?
Check the order of CLK, DIN and DC and the reset wire.
Buttons do nothing: what should I check?
Check they go to D8 and D9 and GND.
Ball too fast: what should I check?
Lower the starting vx or the speed-up factor.
Display hot or dim: what should I check?
Check the series resistors and the backlight resistor.
