Fault finder: Node-RED dashboard for sensors

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing arrives: what should I check?

Check the broker address, user and password.

Dashboard blank: what should I check?

Open the dashboard tab and deploy the flow.

Readings are NaN: what should I check?

Check the pull-up resistor and the data pin.