Fault finder: Kids' colour night light with timer

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No colours: what should I check?

Check the common-anode wiring and the pin order.

Colours inverted: what should I check?

Common anode needs 255 minus the value.

Blue weak: what should I check?

Normal at 3 V.

Does not wake: what should I check?

Check the button on PB2 and the pin-change setting.