Fault finder: NFC tags to trigger home scenes
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
PN532 not found: what should I check?
Check the I2C mode switches and wiring.
No tags read: what should I check?
Hold the tag flat against the module.
Scene not sent: what should I check?
Check the ID in the list matches the printed one in capitals.
MQTT silent: what should I check?
Check the broker address.
