Fault finder: Random number quality test

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing prints: what should I check?

Set 9600 baud in the monitor.

Test C never runs: what should I check?

Press the button once.

B looks the same every time: what should I check?

A floating pin is a weak seed, which is the lesson.

Bars look uneven: what should I check?

Run it again, some variation is normal.

Upload fails: what should I check?

Choose the Old Bootloader option.