Fault finder: Build every gate from NAND

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing lights: what should I check?

Check chip power on pins 14 and 7 and the LED direction.

One output wrong: what should I check?

Check the pin pairs for that gate and the chip 1 pin 11 links.

LEDs flicker: what should I check?

An input is floating; check the pull-downs.

Outputs dim: what should I check?

HC outputs can drive these LEDs, so look for a short or a missing resistor.