Fault finder: Multimeter mastery
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Meter shows zero current: what should I check?
The lead may be in the wrong socket or the fuse has blown.
Resistance reading unstable: what should I check?
Fingers touching the leads add resistance; hold only the insulation.
No beep on continuity: what should I check?
Check the range and that the circuit is off.
Wrong voltage: what should I check?
Check DC versus AC and the range.
