Fault finder: Home MQTT broker on a Pi

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Connection refused: what should I check?

Check allow_anonymous false, the password file path and that you supplied -u and -P.

Service fails to start: what should I check?

Run sudo journalctl -u mosquitto for the error, often a typo in the config file.

Cannot reach it from another device: what should I check?

Check the Pi's IP address and that listener 1883 is set.

Password file errors: what should I check?

Make sure the file is readable by mosquitto and rerun mosquitto_passwd.