Fault finder: Morse code treasure hunt beacons

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No flashes: what should I check?

Check chip orientation and power.

Wrong speed: what should I check?

Check the clock setting before burning.

Buzzer silent: what should I check?

Use a passive buzzer, not an active one.

Garbled letters: what should I check?

Check the code table.