Fault finder: Morse code practice oscillator

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Every letter is wrong: what should I check?

Your dots and dashes are not different enough. Make dashes clearly three times as long.

Extra dots appear: what should I check?

The button bounces. The sketch ignores presses under 20 ms; add a 10 nF capacitor across it if needed.

No sound: what should I check?

Use a passive buzzer on D8.

LCD is blank: what should I check?

Adjust the contrast and try address 0x3F.