Fault finder: Moon phase clock
11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blank screen: what should I check?
Check A4 and A5 and the OLED address.
Wrong date: what should I check?
Reflash once with the computer clock correct.
Phase is a day off: what should I check?
The mean month is approximate, this is normal near the quarters.
Lit side is on the wrong side: what should I check?
Swap the waxing and waning branches for your hemisphere.
Clock resets at power-off: what should I check?
Check the backup cell in the DS3231 module.
