Fault finder: Mood ring thermometer

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Wrong colours: what should I check?

Check the common-anode wiring and PWM inversion.

Temperature off: what should I check?

Calibrate and check the divider side.

Dim or dead: what should I check?

Fresh coin cell and lower brightness.

Jumpy: what should I check?

Increase the smoothing.