Projects / Model carousel / Fault finder

Fault finder: Model carousel

9 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Motor only buzzes: what should I check?

Check the wire order IN1 to IN4 matches the pins.

Moves jerkily: what should I check?

Increase the delay by turning the knob down a little.

Does not move: what should I check?

Check the driver board has 5 V and GND.

Direction wrong: what should I check?

Press the button or swap the pin order.

Skips under load: what should I check?

Make the carousel lighter or slower.