Fault finder: Side distance lights for a model car

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Lights flicker: what should I check?

Increase the number of averaged readings or aim at a flat wall.

Always green: what should I check?

Check Trig and Echo are not swapped and the sensor has 5 V.

Always red: what should I check?

Move the sensor away from the car body.

One LED never lights: what should I check?

Check its direction and resistor.

Serial shows 400: what should I check?

No echo is coming back, so check the wiring.