Projects / Model boom barrier / Fault finder

Fault finder: Model boom barrier

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Opens by itself: what should I check?

Aim the sensor away from walls and increase the near distance check.

Never opens: what should I check?

Check Trig on D7 and Echo on D6, and that the sensor has 5 V.

Servo jitters: what should I check?

Use a better USB port, and keep the servo wires short.

Arm hits the post: what should I check?

Change the two angles in the sketch.

Closes too soon: what should I check?

Lengthen the two-second wait.